Reference Guide

• -type { ghs | dhs} — Assigns a global or dedicated hot-spare.
• -vdkey:<VD FQDD> — Assigns the dedicated hot-spare to the specified virtual disk.
This option is required for dedicated hot-spare.
• -state <start|stop> — start value starts a patrol read operation. stop value
stops a running patrol read operation.
NOTE: To start the operation, the Controller.PatrolReadMode must be in
Manual mode.
• -speed — Specifies the initialization of the Virtual disk.
– fast— Performs fast initialization.
– full— Performs slow initialization.
• blink: <FQDD> or unblink: <FQDD> — <FQDD> can be physical disk drives,
virtual disks, or PCIeSSD.
• <PCIeSSD FQDD> — Specifies the PCIeSSD FQDD.
• <PCIeSSD controller|enclosure FQDD> — Specifies the PCIeSSD controller or
enclosure FQDD.
• preparetoremove — Specifies the PCIeSSD drive to prepare for removal.
NOTE: Ensure that ISM is installed and running to perform the
preparetoremove operation.
• secureerase— Specifies the PCIeSSD drive to perform the secure erase operation.
Example
Inventory
• To view the help details for get command, run the following command:
racadm>>storage help get
racadm storage help get
Storage monitoring and inventory of hardware RAID connected to the system.
Usage :
racadm storage get status
racadm storage help <Object type I/II>
racadm storage get <Object type I>
racadm storage get <Object type I> -current
racadm storage get <Object type I> -pending
racadm storage get <Object type I> -o
racadm storage get <Object type I> -o -p <property names separated by comma>
racadm storage get <Object type I>:<FQDD's of Object type I separated by
comma> -p
<property names separated by comma>
racadm storage get <Object type I>:<FQDD's of Object type I separated by
comma>
racadm storage get <Object type II> --refkey <reference keys separated by
comma>
racadm storage get <Object type II> --refkey <reference keys separated by
comma> -o
racadm storage get <Object type II> --refkey <reference keys separated by
comma> -o
-p <property names separated by comma>
-----------------------------------------------------------------------------
---
Valid Options:
Object type I : controllers, batteries, vdisks, pdisks, fans, emms,
tempprobes, psus, enclosures.
Object type II : batteries, vdisks, pdisks, fans, emms, psus,
102