Reference Guide

separated PD FQDD> [-dcp {enabled|disabled|default}] [-name <VD
name>] [-size <VD size>{b|k|m|g|t}] [-T10PIEnable]
racadm storage init:<VD FQDD> -speed {fast|full}
racadm storage deletevd:<VD FQDD>
racadm storage encryptvd:<VD FQDD>
racadm storage createsecuritykey:<Controller FQDD> -key <Key
id> -xxx <passphrase>
racadm storage modifysecuritykey:<Controller FQDD> -key <Key
id>-xxx <old passphrase> -xxx <new passphrase>
racadm storage deletesecuritykey:<Controller FQDD>
racadm storage ccheck:<vdisk fqdd>
racadm storage cancelcheck:<vdisk fqdd>
• To convert the physical disk drives and assign or delete a Hot spare. To scan physical
disks connected to a controller and detect problem, run the following command:
racadm storage converttononraid:<PD FQDD>
racadm storage converttoraid:<PD FQDD>
racadm storage hotspare:<Physical Disk FQDD> -assign yes -type
dhs -vdkey: <FQDD of VD>
racadm storage hotspare:<Physical Disk FQDD> -assign yes –type
ghs
racadm storage hotspare:<Physical Disk FQDD> -assign no
racadm storage patrolread:<controller FQDD> -state start|stop
NOTE: Any option specified after the –assign option does not affect deleting
the hot-spare.
• To reset, clear, and import the storage configuration to the controller, run the
following command:
racadm storage importconfig:<Controller FQDD>
racadm storage resetconfig:<Controller FQDD>
racadm storage clearconfig:<Controller FQDD>
• To start or stop a blink or identify operation on the specified or PCIeSSD device, run
the following command:
racadm storage blink:<FQDD>
racadm storage blink:<PCIeSSD FQDD>
racadm storage unblink:<FQDD>
racadm storage unblink:<PCIeSSD FQDD>
• To prepare the PCIeSSD drive for removal, run the following command:
racadm storage preparetoremove <PCIeSSD FQDD>
• To perform a secure erase operation on PCIeSSD device, run the following
command:
racadm storage secureerase:<PCIeSSD FQDD>
NOTE: You can also run the command using raid in place of the storage
command.
100