Developers Guide

Configuring the iDRAC Service Module

You can configure the iDRAC Service Module using the:

• iDRAC web interface

• RACADM CLI command

• WSMAN command

Configuring The iDRAC Service Module From iDRAC Web

Interface

To use the iDRAC Service Module from the iDRAC Web interface, go to Overview → Server → Service

Module.

Configuring the iDRAC Service Module from RACADM

The iDRAC Service Module can be accessed and configured through RACADM CLI commands. To know

the status of the features provided by the iDRAC Service Module, use racadm get idrac.servicemodule

command. This command lists the features and their status of the iDRAC Service Module:

• OSInfo

• LCLReplication

• WMI Information

• Auto System Recovery Action

To set or configure the features, use racadm set idrac.servicemodule. <feature name> <enabled or

disabled>.