Users Guide

• Spanish (es)

• Japanese (ja)

• Simplified Chinese (zh-cn)

The ISO identifiers in parentheses denote the supported language variants. For some supported

languages, resizing the browser window to 1024 pixels wide is required to view all features.

iDRAC Web interface is designed to work with localized keyboards for the supported language variants.

Some features of iDRAC Web interface, such as Virtual Console, may require additional steps to access

certain functions or letters. Other keyboards are not supported and may cause unexpected problems.

NOTE: See the browser documentation on how to configure or setup different languages and view

localized versions of iDRAC Web interface.

Updating device firmware

Using iDRAC, you can update the iDRAC, BIOS, and all device firmware that is supported through

Lifecycle Controller update such as:

• Lifecycle Controller

• Diagnostics

• Operating System Driver Pack

• Network Interface Card (NIC)

• RAID Controller

• Power Supply Unit (PSU)

• PCIe Solid-State Drives (SSDs)

You must upload the required firmware to iDRAC. After the upload is complete, the current version of the

firmware installed on the device and the version being applied is displayed. If the firmware being

uploaded is not valid, an error message is displayed. Updates that do not require a reboot are applied

immediately. Updates that require a system reboot are staged and committed to run on the next system

reboot. Only one system reboot is required to perform all updates.

After the firmware is updated, the System Inventory page displays the updated firmware version and logs

are recorded.

The supported firmware image file types are:

• .exe — Windows-based Dell Update Package (DUP)

• .d7 — Contains both iDRAC and Lifecycle Controller firmware.

For files with .exe extension, you must have System Control privilege. The Remote Firmware Update

licensed feature and Lifecycle Controller must be enabled.

For files with .d7 extension, you must have Configure privilege.

NOTE: You can directly upgrade to firmware version 2.10.10.10 from 2.xx.xx.xx on a 13th generation

PowerEdge server and from 1.5x.5x or 1.6x.6x on a 12th generation PowerEdge server.

NOTE: After upgrading the iDRAC firmware, you may notice a difference in the time stamp

displayed in the Lifecycle Controller log until the iDRAC time is reset using NTP. The Lifecycle log

displays the BIOS time until the iDRAC time is reset.