Users Guide

Network settings

Setting up managed system

If you need to run local RACADM or enable Last Crash Screen capture, install the following from the Dell

Systems Management Tools and Documentation DVD:

• Local RACADM

• Server Administrator

For more information about Server Administrator, see Dell OpenManage Server Administrator User’s

Guide available at dell.com/support/manuals.

Related Links

Modifying local administrator account settings

After setting the iDRAC IP address, you can modify the local administrator account settings (that is, user

2) using the iDRAC Settings utility. To do this:

1. In the iDRAC Settings utility, go to User Configuration.

The iDRAC Settings User Configuration page is displayed.

2. Specify the details for User Name, LAN User Privilege, Serial Port User Privilege, and Change

Password.

For information about the options, see the iDRAC Settings Utility Online Help.

3. Click Back, click Finish, and then click Yes.

The local administrator account settings are configured.

Setting up managed system location

You can specify the location details of the managed system in the data center using the iDRAC Web

interface or iDRAC Settings utility.

Setting up managed system location using web interface

To specify the system location details:

1. In the iDRAC web interface, go to Overview → Server → Properties → Details.

The System Details page is displayed.

2. Under System Location, enter the location details of the managed system in the data center.

For information about the options, see the iDRAC Online Help.

3. Click Apply. The system location details are saved in iDRAC.

Setting up managed system location using RACADM

To specify the system location details, use the System.Location group objects. For more information,

see the iDRAC8 RACADM Command Line Interface Reference Guide available at dell.com/support/

manuals.