Release Notes

• Red Hat Enterprise Virtualization (RHEV) Hypervisor 5.9
• Red Hat Enterprise Virtualization (RHEV) Hypervisor 6.4
• Red Hat Enterprise Virtualization (RHEV) Hypervisor 6.5
• SUSE Linux Enterprise Server (SLES) version 10 SP4 (64-bit)
• SUSE Linux Enterprise Server (SLES) version 11 SP2
• VMware vSphere version 5.0 U2
• VMware vSphere version 5.1 U2
• VMware vSphere version 5.5
• Citrix XenServer version 6.1
• Citrix XenServer version 6.2
Supported Web Browsers for iDRAC7
• Microsoft Internet Explorer 8
• Microsoft Internet Explorer 9
• Microsoft Internet Explorer 10
• Microsoft Internet Explorer 11
• Safari version 5.2
• Safari version 6.0
• Mozilla Firefox version 22
• Mozilla Firefox version 23
• Google Chrome version 27
• Google Chrome version 28
What’s New
iDRAC7 defect fixes - See the iDRAC7 Fixes section for details.
iDRAC7 – Fixes
• iDRAC Web interface reports RAC0501: iDRAC Web GUI has no valid information in the Storage
section, that is, no out-of-band capable storage controller detected.
• Insertion of 1600W (excluding Power Supply Unit (PSU)) does not generate a SEL entry to
indicate that the PSU is not configured correctly.
• Redundancy remains degraded after the failed PSU is removed and replaced with a good PSU.
• During boot at end of POST, erroneous 1600W PSU messages are generated from the system if
there is a 1100W PSU and 750W PSU mismatch.
• racadm set iDRAC.Security.CsrOrganizationName does not allow you to use racadm sslcsrgen -g
command.
• iDRAC7 - Getting a configuration from iDRAC7 using racadm getconfig –f command and then
replicating the identical configuration to another iDRAC7 results in an error for the object
"cfgNetTuningNic100MB=2". This object cannot be set manually if auto-negotiation is enabled.
• PhysicaldiskID value is null after background initialization is completed.
• PERC9: Inconsistency in listing of Virtual Disks using RACADM.
• PERC9: In real-time, RACADM and iDRAC Web interface does not display the physical disk state
correctly.
• PERC9: Patrol Read state of physical disk is displayed as unknown in RACADM.
• Cannot create virtual disk on external controller when internal controller is present.