Release Notes

Resolution
If the system is still powered on, ignore this message.
Versions/Systems Affected
All 12th generation Dell PowerEdge Rack and Tower servers.
Issue 74:
Description
If the iDRAC has a large number of records in the Lifecycle Log and from remote RACADM, if you run the
racadm lclog view, an error message is displayed.
Resolution
To view the logs, use local racadm, firmware racadm, iDRAC Web interface or WSMAN. To view the latest
logs using remote racadm, use the
-n option. For example, to view the 10 latest logs, use racadm lclog
view -n 10
.
Versions/Systems Affected
All 12th generation Dell PowerEdge systems with iDRAC7.
Issue 75:
Description:
If the license level is Base Management with IPMI, when you upload a Dell Update Package (DUP) in .exe
format, a license related error message appears.
Resolution
In Base Management with IPMI license, you can only upload .d7 image format. To upload .exe files,
upgrade the license to iDRAC Enterprise and then retry the operation.
Versions/Systems Affected
All 12th generation Dell PowerEdge systems with iDRAC7.
Issue 76:
Description
In the iDRAC Web interface, there is a mismatch in the hardware inventory and the software inventory
for the display name of the Physical disk entries.
Resolution
The software inventory Physical disk display name is not included the Controller Identifier. See the
hardware inventory physical disk display name for information about the Controller Identifier.
Versions/Systems Affected
All 12th generation Dell PowerEdge systems with iDRAC7.
Issue 77:
Description
Automatic restore feature is not available in this release and so setting the new value to the Lifecycle
Controller attribute “Automatic Restore Feature” displays the error “Invalid AttributeName”
Resolution
Ignore the Lifecycle Controller attribute “Automatic Restore Feature” during the WSMAN enumeration.
Versions/Systems Affected
All 12th generation Dell PowerEdge systems with iDRAC7.