Release Notes

• The e-mail address specified in iDRAC7 Web interface -> Overview -> iDRAC Settings ->
Network -> SSL -> Generate Certificate Signing Request (CSR) page is not validated.
• On a Linux management station with Matrox drivers, from the Virtual Console Viewer if you
access the iDRAC Chat window, the mouse appears flickering inside the chat window.
• Work notes can display up to 255 characters. If any of the characters are special characters or
non-alpha numeric characters, then the total number of characters displayed is less than 255 to
accommodate overriding special characters.
• Performing a graceful shutdown from the iDRAC7 Web interface or updating the BIOS or the
firmware using the iDRAC7 update method:
• For SLES 11 SP2:
A prompt appears for the Super user password in the operating system console. Provide the root
password and proceed with the graceful shutdown or firmware/BIOS update.
• For Windows OS in screen lock state:
Graceful shutdown does not happen because, Windows operating system has a policy setting to
disable shutdown while in locked state. Make sure that this policy is enabled.
If it is not enabled, then it proceeds with ungraceful shutdown. This is equivalent to losing
power. After the server resets, multiple options are displayed to start Windows. Select Start
Windows Normally and then check the System Event Log file. You can see that an event is
logged in for the ungraceful shutdown.
• Performing a graceful shutdown from the iDRAC7 Web interface or updating the BIOS or the
firmware using the iDRAC7 update method:
− For SLES 11 SP2:
A prompt appears for the Super user password in the operating system console. Provide the root
password and proceed with the graceful shutdown or firmware/BIOS update.
− For Windows OS in screen lock state:
Graceful shutdown does not happen because, Windows operating system has a policy setting to
disable shutdown while in locked state. Make sure that this policy is enabled.
If it is not enabled, then it proceeds with ungraceful shutdown. This is equivalent to losing power.
After the server resets, multiple options are displayed to start Windows. Select Start Windows
Normally and then check the System Event Log file. You can see that an event is logged in for the
ungraceful shutdown.
• In the iDRAC Web interface > Overview > Server > Lifecycle Log page, when the filter criteria
results in nothing found, the Log Results section does not display any user-friendly information
and it is blank instead.
• VNC disconnects after host reboot on Wyse PocketCloud,
• Encrypted VNC does not work through Real VNC client.
• VNC does not work through mobile when encryption is enabled.
• OS to iDRAC communication through the USB NIC interface is not supported on RHEV – H
(hypervisor) system.
• OS to iDRAC pass-through feature does not work when the host operating system is Linux.
• iDRAC Virtual NIC driver is not loaded when Windows 2008 SP2 (64 bit) installation has
completed.
• When Virtual Console is in Lifecycle Controller, if Next Boot is set to BIOS Setup , rebooting the
system boots to Lifecycle Controller instead of BIOS Setup.
• If the http or https service port is set to 1 or 65535, and if you launch the iDRAC7 Web interface
using Google Chrome browser, it does not launch iDRAC7. This is because of a limitation in the
Google Chrome browser. The resolution is to use Internet Explorer or Mozilla Firefox browsers.
• You cannot start the iDRAC after updating the NIC firmware, because the update process resets
NDC. To resolve this issue, reset iDRAC after updating the NIC firmware.