Manualshelf

Reference Guide

ManualsBrandsDell ManualsActive System ManageriDRAC7 Version 1.55.55
919293949596979899100
• Display the iDRAC agent idrac records, under the storage category and storage physical disk
drive subcategory, with severity set to warning.
racadm lclog view -a idrac -c storage -b pdr -s warning
• Display the records under storage and system categories with severities set to warning or
critical.
racadm lclog view -c storage,system -s warning,critical
• Display the records having severities set to warning or critical, starting from sequence
number 4.
racadm lclog view -s warning,critical -q 4
• Display 5 records starting from sequence number 20.
racadm lclog view -q 20 -n 5
• Display all records of events that have occurred between 2011-01-02 23:33:40 and 2011-01-03
00:32:15.
racadm lclog view -r "2011-01-02 23:33:40" -e "2011-01-03
00:32:15"
• Display all the available records from the active Lifecycle log.
racadm lclog view
NOTE: If output is not returned when this command is used remotely, then retry increasing
the remote RACADM timeout value. To increase the timeout value, run the command
racadm set iDRAC.Racadm.Timeout <value>. Alternatively, you can retrieve
few records.
• Add a comment to record number 5 in the Lifecycle log.
racadm lclog comment edit –q 5 –m “This is a test comment.”
• Add a worknote to the Lifecycle log.
racadm lclog worknote add -m "This is a test worknote."
• Export the Lifecycle log to a remote CIFS share.
racadm lclog export -f Mylog.xml -u admin -p mypass -l //
10.94.161.103/share
• Export the complete Lifecycle log in gzip format to a remote CIFS share.
racadm lclog export -f log.xml.gz -u admin -p mypass -l //
10.94.161.103/share --complete
• Export the Lifecycle log to a remote NFS share.
racadm lclog export -f Mylog.xml -l 10.94.161.103:/home/
lclog_user
• Export the Lifecycle log to a local share using Local RACADM.
racadm lclog export -f Mylog.xml
• Export the complete Lifecycle log in gzip format to a local share using Local RACADM.
racadm lclog export -f log.xml.gz --complete
• Export the Lifecycle log lclog to a local share using Remote RACADM.
racadm -r 10.94.161.119 -u root -p calvin lclog export -f
Mylog.xml
• Display the status of the specified Job ID with Lifecycle Controller.
racadm lclog viewconfigresult -j JID_123456789012
license
Description
Manages the hardware licenses.
97