Reference Guide

cfgSensorRedundancy
This group is used to set the power supply redundancy. This group is applicable only for iDRAC.
The following sections provide information about the objects in the cfgSensorRedundancy group.
This group is applicable only for iDRAC on Rack and Tower Servers and not for iDRAC Enterprise on Blade Servers.
cfgSensorRedundancyIndex (Read Only)
Description
Specifies index for the sensor redundancy group being read. Only power supply redundancy is
supported.
Legal Values
1
Default
None
cfgSensorRedundancyPolicy (Read or Write)
Description
Sets the power supply redundancy policy.
Legal Values
• 2 — N/A, for systems that are not supported
• 3 — Non Redundant
• 4–1+1 Redundant
• 4–2+1 Redundant
• 16–2+2 Redundant
Default
Any legal value at that particular execution instance.
cfgSensorRedundancyCapabilities (Read Only)
Description
Returns the redundancy capabilities in the form of a bitmask. This bitmask allows the user to know
which values can be set for cfgSensorRedundancyPolicy.
Legal Values
A bit mask. More than 1 bit can be set at a time to indicate multiple redundancy support.
• 0- N/A, for systems that are not supported
• 1- Non-Redundant
• 2- 1+1 — Redundant
• 4- 2+1 — Redundant
• 8- 2+2 — Redundant
Default
0
cfgSensorRedundancyStatus (Read Only)
Description
Indicates the redundancy status. The status is N/A on platforms that do not support the power
supply sensor redundancy.
Legal Values
String:
• N/A
• Full
238