Reference Guide

If this property is enabled when the host server is rebooted, this feature attempts to start from the
virtual media devices — if the appropriate media is installed in the device.
Legal Values
• 1 (TRUE)
• 0 (FALSE)
Default
0
cfgVirMediaFloppyEmulation (Read or Write)
Description
When set to 0, the virtual floppy drive is recognized as a removable disk by Windows operating
systems. Windows operating systems assigns a drive letter that is C: or higher during enumeration.
When set to1, the Virtual Floppy drive is seen as a floppy drive by Windows operating systems.
Windows operating systems assigns a drive letter of
A: or B:.
NOTE: Virtual Media has to be reattached (using cfgVirMediaAttached) for this change
to take effect.
Legal Values
• 1 (TRUE)
• 0(FALSE)
Default
0
cfgSDWriteProtect (Read Only)
Description
Displays if the physical write protect latch on the SD card is enabled or disabled.
NOTE: This command is deprecated from iDRAC 1.5 and CMC 3.0 releases onwards. The
functionality of this command covers cfgVFlashSDWriteProtect. While execution of the
cfgSDWriteProtect command is successful, use the cfgVFlashSDWriteProtect command. For
more information, see cfgVFlashSDWriteProtect Read Only.
Legal Values
• 1 (TRUE)
• 0(FALSE)
Default
0
cfgServerInfo
For iDRAC this group allows you to select the BIOS first boot device and provides the option to start the selected device
only once.
For CMC, this group allows you to display and configure a server in the chassis.
Use this object with the config or getconfig subcommands.
To use this object property for CMC, you must have the Chassis Configuration Administrator privilege.
NOTE: For CMC, you can configure a setting does not have the hash sign (#) prefixed in the output. To modify a
configurable object, use the —o option
The following sections provide information about the objects in the cfgServerInfo.
181