Reference Guide

cfgOobSnmp
This group contains parameters to configure the SNMP agent and trap capabilities of iDRAC or CMC. One instance of
the group is allowed.
The CMC SNMP agent supports the standard RFC1213 mib-2 and the Dell enterprise-specific the MIB.
This group is not applicable for iDRAC on Rack and Tower Servers.
For CMC, use this object with the config or getconfig subcommands.
To use this object property for CMC, you must have the Chassis Configuration Administrator privilege.
NOTE: For CMC, you can configure a setting that does not have the hash sign (#) prefixed in the output. To modify a
configurable object, use the —o option.
The following sections provide information about the objects in the cfgOobSnmp group.
cfgOobSnmpAgentCommunity (Read or Write)
Description
Specifies the SNMP Community Name used for SNMP traps. The community string acts as a
password shared between different hosts over the network. This community string value must match
with the other hosts for any kind of communication through SNMP.
Legal Values
A string of up to 31 characters.
Default
public
Example
racadm getconfig -g cfgOobSnmp
cfgOobSnmpTrapsEnable=1
cfgOobSnmpAgentCommunity=public
cfgOobSnmpAgentEnable (Read or Write)
Description
Enables or disables the SNMP agent in iDRAC or CMC.
Legal Values
• 1 (TRUE)
• 0 (FALSE)
Default
0
cfgTraps
This group displays information for and configures delivery of SNMP traps for a specific user.
This group is applicable only for CMC. Use this object with the config or getconfig subcommands.
To use this object property, you must have the Chassis Configuration Administrator privilege.
NOTE: You can configure a setting that does not have the hash sign (#) prefixed in the output. To modify a
configurable object, use the —o option.
171