Reference Guide

Default
********
cfgUserAdminEnable (Read or Write)
Description
Enables or disables an individual user.
NOTE: You can enable a user for a given index, only if you set the password for the same user.
Legal Values
• 1 (TRUE)
• 0(FALSE)
Default
• For iDRAC: 1 (User 2), 0 (All others)
• For CMC: 0
cfgUserAdminSolEnable (Read or Write)
Description Enables or disables Serial Over LAN (SOL) user access for the user.
This object property is specific to iDRAC.
Legal Values
• 1 (TRUE)
• 0(FALSE)
Default
0
cfgUserAdminIpmiSerialPrivilege (Read or Write)
Description The maximum privilege on the IPMI LAN channel.
This object is applicable only for iDRAC on Rack and Tower Servers and not for iDRAC Enterprise on
Blade Servers or CMC.
Legal Values
• 2 (User)
• 3 (Operator)
• 4 (Administrator)
• 15 (No access)
Default
• 4 (User 2)
• 15 (All others)
cfgEmailAlert
This group contains parameters to configure iDRAC or CMC email alerting capabilities. Up to four instances of this group
are allowed.
Use this object with the config or getconfig subcommands.
To use this object property for CMC, you must have the Chassis Configuration Administrator privileges.
NOTE: For CMC, you can configure a setting that does not have the hash sign (#) prefixed in the output. To modify a
configurable object, use the —o option.
164