Reference Guide

• Upload a valid key to iDRAC User 2 in the first key space using a file.
$ racadm sshpkauth -i 2 -k 1 -f pkkey.key
Key file successfully uploaded.
• Get all keys for User 2 on iDRAC.
$ racadm sshpkauth -v -i 2 -k all
********************* User ID 2 ******************
Key ID 1:
ssh-rsa AAAAB3NzaC1yc2EAAAABIwAAAIEAzzy
+k2npnKqVEXGXIzo0sbR6JgA5YNbWs3ekoxXV
fe3yJVpVc/5zrrr7XrwKbJAJTqSw8Dg3iR4n3vUaP
+lPHmUv5Mn55Ea6LHUslAXFqXmOdlThd
wilU2VLw/iRH1ZymUFnut8ggbPQgqV2L8bsUaMqb5PooIIvV6hy4isCNJU=
1024-bit RSA, converted from OpenSSH by [e-mail]
Key ID 2:
Key ID 3:
Key ID 4:
sslcertdownload
Description Downloads an SSL certificate from iDRAC or CMC to the client’s file system.
To run this subcommand, you must have the Configure iDRAC permission.
Synopsis
racadm sslcertdownload -f <filename> -t <type>
Input
• -f — Specifies the target filename on local file system to download the certificate.
• -t — Specifies the type of certificate to download, either the CA certificate for Directory
Service or the server certificate.
– 1=server certificate
– 2=CA certificate for Directory Service
– 3=Custom signing certificate
Output Returns 0 when successful and nonzero number when unsuccessful.
Example
racadm sslcertdownload -t 1 -f c:\cert\cert.txt
NOTE: This command is not supported in the firmware RACADM interface as it is not a file system.
sslcertupload
Description Uploads a custom SSL server or CA certificate for Directory Service from the client to iDRAC or
CMC.
To run this subcommand, you must have the Configure iDRAC permission.
NOTE: For CMC only: This subcommand is only supported on the remote interfaces.
Synopsis
racadm sslcertupload -t <type> -f <filename> -p <passphrase> [-k
<key file>]
128