Reference Guide

• Disable Remote File Sharing.
racadm remoteimage -d
Disable Remote File Started. Please check status using -s
option to know Remote File Share is ENABLED or DISABLED.
• Check Remote File Share status.
racadm remoteimage -s - status
Remote File Share is Enabled
UserName
Password
ShareName //10.94.161.112/xxxx/dtk_3.3_73_Linux.iso
• Deploy a remote image on iDRAC CIFS Share.
racadm remoteimage -c -u root -p calvin -l //192.168.0.180/dev/
floppy.img
• Deploy a remote image on iDRAC NFS Share.
racadm remoteimage -c –m server-1 -u root -p calvin -l '//
192.168.0.180/dev/floppy.img'
• Deploy a remote image to server 1 from the CMC.
racadm remoteimage -c –m server-1 -u root -p calvin -l '//
192.168.0.180/dev/floppy.img'
• Deploy a remote image on iDRAC CIFS share for all the servers.
racadm remoteimage -c -a -l '//192.168.0.180/dev/floppy.img' -u
root -p calvin
• Deploy a remote image on iDRAC NFS share for all the servers.
racadm remoteimage -c -a -l '192.168.0.180:/dev/floppy.img' -u
root -p calvin
rollback
Description Allows you to roll back the firmware to an earlier version.
Synopsis
racadm rollback <FQDD>
NOTE: To get the list of available rollback versions and FQDDs, run the racadm
swinventory command.
Input <FQDD>: Specify the FQDD that has the rollback version.
Example
• racadm rollback iDRAC.Embedded.1-1
• racadm rollback BIOS.Setup.1-1
serveraction
Description Enables you to perform power management operations on the host system.
To run this subcommand, you must have the Execute Server Control Commands permission.
Synopsis
racadm serveraction -a <action>
racadm serveraction -m <module> <action>
Input
• -m <module> — Must be one of the following values:
116