Reference Guide

SupportEnhancedAutoForeignImport = Supported
EnhancedAutoImportForeignConfig = Disabled
SupportControllerBootMode = Supported
ControllerBootMode = User Mode
This command displays the filtered property values for all returned controller objects.
racadm raid get controllers -o -p Name
RAID.Integrated.1-1
Name = PERC H710P Adapter (Embedded)
This command displays the operations pending on the controller.
racadm raid get <controller> -pending
Raid.Integrated.1-1
Raid.Slot.2-1
– To generate and view information about the inventory of batteries connected to the controller.
racadm raid get batteries
This command is an optimized version and displays the batteries along with their keys.
racadm raid get batteries -o
Battery.Integrated.1:RAID.Integrated.1-1
Name = Battery
DeviceDescription = Battery on Integrated RAID Controller 1
Status = Ok
State = Ready
This command displays the filtered property values for all battery objects.
racadm raid get batteries -o -p Name
Battery.Integrated.1:RAID.Integrated.1-1
Name = Battery
This command displays all battery keys connected to the controllers.
racadm raid get batteries --refkey RAID.Integrated.1-1
Battery.Integrated.1:RAID.Integrated.1-1
This command is an optimized and filtered version.
racadm raid get batteries --refkey RAID.Integrated.1-1 -o -p Name
Battery.Integrated.1:RAID.Integrated.1-1
Name = Battery
– To generate and view information about the inventory of virtual disks connected to the controller.
racadm raid get vdisks
Disk.Virtual.0:RAID.Integrated.1-1
This command displays all virtual disk keys connected to the controllers.
racadm raid get vdisks --refkey RAID.Integrated.1-1
Disk.Virtual.0:RAID.Integrated.1-1
This command is an optimized and filtered version.
racadm raid get vdisks -o -p DeviceDescription,OperationalState
Disk.Virtual.0:RAID.Integrated.1-1
DeviceDescription = Virtual Disk 0 on Integrated RAID Controller 1
OperationalState = Not applicable
– To generate and view information about the inventory of storage enclosures connected to the connector.
This command displays all enclosure objects for the connector FQDD.
racadm raid get enclosures -o
Enclosure.Internal.0-1:RAID.Integrated.1-1
Status = Ok
DeviceDescription = Backplane 1 on Connector 0 of
Integrated RAID Controller 1
RollupStatus = Ok
Name = BP12G+EXP 0:1
111