Reference Guide

• To generate and view information about the inventory of fans.
racadm raid get fans --refkey <enclosure FQDDs separated by
comma>
racadm raid get fans --refkey <enclosure FQDDs separated by
comma > -o
racadm raid get fans --refkey <enclosure FQDDs separated by
comma> -o -p <property names separated by comma>
• To generate and view information about the inventory of EMMs.
racadm raid get emms -refkey <enclosure FQDDs separated by
comma>
racadm raid get emms --refkey <enclosure FQDDs separated by
comma> -o
racadm raid get emms --refkey <enclosure FQDDs separated by
comma> -o -p <property names separated by comma>
• To generate and view information about the inventory of PSU.
racadm raid get psus -refkey <enclosure FQDDs separated by
comma>
racadm raid get psus --refkey <enclosure FQDDs separated by
comma> -o
racadm raid get psus --refkey <enclosure FQDDs separated by
comma> -o -p <property names separated by comma>
• To create, delete, and secure the virtual disks.
racadm raid createvd:<Controller FQDD> -rl {r0|r1|r5|r6|r10|r50|
r60}[-wp {wt|wb}] [-rp {nra|ra|ara}] [-ss {1k|2k|4k|8k|16k|32k|
64k|128k|256k|512k|1M|2M|4M|8M|16M}]-pdkey:<comma separated PD
FQDD> [-dcp {enabled|disabled|default}] [-name <VD name>] [-
size <VD size> {b|k|m|g|t}] [-T10PIEnable]
racadm raid init:<VD FQDD> -speed {fast}
racadm raid deletevd:<VD FQDD>
racadm raid encryptvd:<VD FQDD>
racadm raid createsecuritykey:<Controller FQDD> -key <Key id> -
passwd <passphrase>
racadm raid modifysecuritykey:<Controller FQDD> -key <Key id>-
oldpasswd <old passphrase> -newpasswd <new passphrase>
racadm raid deletesecuritykey:<Controller FQDD>
• To convert the physical disk drives and assign or delete a hot-spare.
racadm raid converttononraid:<PD FQDD>
racadm raid converttoraid:<PD FQDD>
racadm raid hotspare:<Physical Disk FQDD> -assign yes -type dhs
-vdkey: <FQDD of VD>
racadm raid hotspare:<Physical Disk FQDD> -assign no
NOTE: Any option specified after the –assign option does not affect deleting the hot-
spare.
108