Reference Guide

To run this subcommand, you must have the Configure iDRAC permission.
Synopsis
• racadm raid
• To generate and view information about the inventory of storage root node.
racadm raid get status
• To generate and view information about the inventory of controllers.
racadm raid get controllers -o
racadm raid get controllers -o -p <property names separated by
comma>
• To generate and view information about the inventory of batteries.
racadm raid get batteries -o
racadm raid get batteries --refkey <controller FQDD's separated
by comma>
racadm raid get batteries --refkey <controller FQDD's separated
by comma> -o
racadm raid get batteries --refkey <controller FQDD's separated
by comma> -o -p <property names separated by comma>
• To generate and view information about the inventory of virtual disks.
raid get vdisks
racadm raid get vdisks --refkey <controller FQDDs separated by
comma>
racadm raid get vdisks --refkey <controller FQDDs separated by
comma> -o
racadm raid get vdisks --refkey <controller FQDDs separated by
comma> -o -p <property names separated by comma>
• To generate and view information about the inventory of enclosures.
racadm raid get enclosures -o
racadm raid get enclosures --refkey <connector FQDDs separated
by comma>
racadm raid get enclosures --refkey <connector FQDDs separated
by comma> -o -p <property names separated by comma>
• To generate and view information about the inventory of physical disk drives.
raid get pdisks
racadm raid get pdisks -o
racadm raid get pdisks -o -p <property names separated by comma>
racadm raid get pdisks --refkey <enclosure/Backplanes FQDDs
separated by comma>
racadm raid get pdisks --refkey <enclosure/Backplanes FQDDs
separated by comma> -o
racadm raid get pdisks --refkey <enclosure/Backplanes FQDDs
separated by comma> -o -p <property names separated by comma>
107