Reference Guide

Examples
• Displays the statistics for the NIC FQDD.
$racadm nicstatistics <NIC FQDD>
• Displays the statistics for the integrated NIC.
$ racadm nicstatistics NIC.Integrated.1-1
Total Bytes Received:0
Total Bytes Transmitted: 0
Total Unicast Bytes Received: 0
Total Multicast Bytes Received: 0
Total Broadcast Bytes Received: 0
Total Unicast Bytes Transmitted: 0
• Get the network statistics
$ racadm nicstatistics
NIC.Slot.5-2-1 : QLogic CNA Gigabit Ethernet-B8:AC:6F:B3:BF:10
NIC.Slot.5-2-1 : QLogic CNA Gigabit Ethernet-B8:AC:6F:B3:BF:11
NIC.Slot.5-2-1 : QLogic CNA Gigabit Ethernet-B8:AC:6F:B3:BF:12
NIC.Slot.5-2-1 : QLogic CNA Gigabit Ethernet-B8:AC:6F:B3:BF:13
NIC.Slot.5-2-1 : QLogic CNA Gigabit Ethernet-B8:AC:6F:B3:BF:14
ping
Description Verifies that the destination IP address is reachable from iDRAC with the current
routing-table contents. A destination IP address is required. An ICMP echo packet is
sent to the destination IP address based on the current routing-table contents.
To use this subcommand for CMC you must have Administrator privilege for CMC and
for iDRAC you must have Execute Diagnostic Commands .
Synopsis
racadm ping <ipaddress>
ping6
Description Verifies that the destination IPv6 address is reachable from iDRAC or CMC or with the current
routing-table contents. A destination IPv6 address is required. An ICMP echo packet is sent to the
destination IPv6 address based on the current routing-table contents.
To use this subcommand for CMC you must have Administrator privilege for CMC and for iDRAC
you must have Execute Diagnostic Commands permission.
Synopsis
racadm ping6 <ipv6address>
81