White Papers

Integrating iDRAC7 with Active Directory
31
Configuring the iDRAC Admin User Association Object (continued) Figure 24.
8. Repeat for the Guest User (also known as the read-only User):
• Right-click on Dell iDRAC Guest User Association and select Properties.
• On the Users tab, click Add > Object Types > select Groups, and then click OK.
• In the Enter the object names to select field, enter iDRACReadOnlyUsers and click
Check Names (it must display the object). Click OK.
• The Privilege Object tab is pre-populated with the DellGuestPriv object.
• On the Products tab, click Add.
• Enter the iDRAC name (idrac1) and click Check Names (it must display the object).
Click OK and again click OK.
9. Repeat for the Power User (also known as the Operator):
• Right-click on Dell iDRAC Power User Association and select Properties.
• On the Users tab, click Add > Object Types > select the Groups box. Click OK.
• In the Enter the object names to select field, enter iDRACOperators and click Check
Names (it must display the object). Click OK.
• The Privilege Object tab is pre-populated with the DellPowerPriv object.
• On the Products tab, click Add.