White Papers

Integrating iDRAC7 with Active Directory
14
10. Select Specify Domain Controller Addresses and enter the FQDN of your Domain Controller for
Domain Controller Server Address 1 (for example, ad2.test.lab).
11. Click Next.
12. Select Standard Schema.
13. Click Next.
14. Select Specify Global Catalog Server Addresses and enter the FQDN of your Domain Controller
for Global Catalog Server Address 1 (for example, ad2.test.lab).
15. Click Role Group 1.
• Group Name - Enter iDRACAdministrators.
Note: All group names must be an exact match to the group names you created earlier
in Active Directory.
• Group Domain - Enter your domain name. For example, test.lab.
• Role Group Privilege Level - Select Administrator from the drop-down menu.
Note: All the nine privilege options are selected. Even though these privileges can be
customized, it is recommended that you use the default options selected for the
Administrator and Read Only users. "Operator" can be used for customized privilege
selections.
• Click Apply.
16. Click Role Group 2.
• Group Name - iDRACOperators
• Group Domain -test.lab for example
• Privilege Level - Select Operator from the drop-down menu.
Note: Seven privileges are selected. Customize the privileges (if any) by selecting or
clearing the appropriate boxes as required.
• Click Apply.
17. Click Role Group 3.
• Group Name - iDRACReadOnlyUsers
• Group Domain - test.lab for example
• Privilege Level - Select Read Only from the drop-down menu.
• Click Apply and then click Finish.
A summary page similar to the following figure is displayed.