Reference Guide

Table Of Contents

The sslcsrgen -s subcommand returns one of the

following status codes:

• CSR was generated successfully.

• CSR does not exist.

Example

racadm sslcsrgen -s

racadm sslcsrgen -g -f c:\csr

\csrtest.txt

NOTE: Before a CSR can be generated, the CSR fields must be configured in the RACADM cfgRacSecurity group.

For example: racadm config -g cfgRacSecurity -o cfgRacSecCsrCommonName MyCompany

NOTE: In telnet/ssh console, you can only generate and not download the CSR file.

sslkeyupload

Description Uploads SSL key from the client to iDRAC.

To use this subcommand, you must have Configure iDRAC

permission.

Synopsis

racadm sslkeyupload -t <type> -f

Input

• -t — Specifies the key to upload.

1 = SSL key used to generate the server certificate

• -f — Specifies the file name of the SSL key to be

uploaded.

Output Returns 0 when successful and a nonzero number when

unsuccessful.

Example

racadm sslkeyupload -t 1 -f c:

\sslkey.txt

sslresetcfg

Description Restores the web-server certificate to factory default and

restarts web-server. The certificate takes effect 30

seconds after the command is entered.

To use this subcommand, you must have Chassis

Configuration Administrator privilege for CMC and

Configure iDRAC permission for iDRAC.

Synopsis

racadm sslresetcfg

Example

$ racadm sslresetcfg

Certificate generated successfully and

webserver restarted.

NOTE: For more information on managing SSL certificates, see the “Securing CMC Communications Using SSL and

Digital Certificates” section in the

Dell Chassis Management Controller User Guide