Reference Guide

Server-7 Present ON OK
Server-8 Not Present N/A N/A N/A
Server-9 Not Present N/A N/A N/A
Server-10 Extension(2) N/A N/A N/A
Server-11 Not Present N/A N/A N/A
Server-12 Present ON OK
Server-13 Not Present N/A N/A N/A
Server-14 Present ON OK 0000015
Server-15 Present ON OK
Server-16 Present ON OK
KVM Present ON OK
IO-Cable Present ON OK ABC1234
FPC-Cable Present ON OK ABC1234
NOTE: For CMC (only) a power state of "Primary" denotes Active CMC.
getniccfg
Description Displays the current NIC settings.
To use this subcommand, you must have Login to iDRAC
permission.
Synopsis
racadm getniccfg
Input
racadm getniccfg
Example
racadm getniccfg
Output
The getniccfg subcommand displays an appropriate error message if the operation is not successful. Otherwise, on
success, the output is displayed in the following format:
IPv4 settings:
NIC Enabled = 1
IPv4 Enabled = 1
DHCP Enabled = 1
IP Address = 10.35.0.64
Subnet Mask = 255.255.255.0
Gateway = 10.35.0.1
57