Reference Guide

FW Update Method iDRAC on Blade Servers iDRAC on Rack and Tower
Servers
CMC
Local RACADM
Yes Yes No
Local RACADM - TFTP
Yes Yes No
Local RACADM - FTP
Yes Yes No
Remote RACADM
Yes Yes Yes
Remote RACADM-TFTP
Yes Yes Yes
Remote RACADM-FTP
Yes Yes Yes
Firmware RACADM-TFTP
Yes Yes Yes
Firmware RACADM-FTP
Yes Yes Yes
get
Description Allows the user to read the value of configuration objects on the iDRAC. The values
read are the values currently being used by the device.
To use this subcommand, you must have Configure iDRAC privilege.
This subcommand is applicable for iDRAC only.
Synopsis
• racadm get -f <filename>[-pending]
• racadm get < FQDD | FQDD Alias>[.<index>][.<group>]
[.<index>][.<object>]
Input
• <FQDD | FQDD Alias> -
Specifies the Fully Qualified Device Descriptor, or FQDD (for example,"NIC.Slot.
1-2" or "Disk.Virtual.0:RAID.Integrated.1") or FQDD alias (for example, "BIOS" or
"iDRAC") of the target device.
— List of FQDDs
— System.Power
— System.Power.Supply
— System.Location
— LifecycleController.LCAttributes
— System.LCD
— iDRAC.IMC
• <group> — Specifies the group containing the object that is to be read.
• <object> — Specifies the object name of the value to be read.
• <index> — Specifies where FQDDs, FQDD Alias's or Groups need to be
indexed.
• -f <filename> — Enables the subcommand to write the device
configuration to a file specified by < filename >. This option is not supported in
Firmware racadm interface.
For Indexed groups if a group is not configured then it will not be saved to the
configuration file.
• -u — Displays the group(s) associated with a specific user.
• -v - verbose — Displays additional details with the display of the
properties and is used with the -g option.
40