Reference Guide

Feb 19 15:52:41 (none) last message repeated 4
times
Feb 19 15:54:12 (none) last message repeated 4
times
Feb 19 15:56:11 (none) last message repeated 2
times
Feb 22 11:46:11 (none) kernel:
coredumpdelete
Description Clears any currently resident coredump data stored in the
RAC.
This option is applicable only for iDRAC.
To use this subcommand, you must have Clear Logs or
Execute Debug Commands permission.
NOTE: If a coredumpdelete command is issued and a
coredump is not currently stored in the RAC, the
command displays a success message. This behavior
is expected. See the coredump subcommand for more
information on viewing a coredump.
Synopsis
racadm coredumpdelete
Input None
Output None
Example
racadm coredumpdelete
Coredump request completed successfully
deploy
Description Configures the static IP address, subnet mask, gateway, and password for the root
user on iDRAC for the specified server.
To use this subcommand, you must have Server Administrator privilege.
NOTE: You can also use setniccfg to configure static IP address, subnet mask,
and gateway, as well as DHCP, speed, and duplex properties.
Synopsis
• racadm deploy -m <module> -u root -p <password> -s
<ipaddress> <subnet> <gateway> -b <device> -o <no|
yes>
• racadm deploy -m <module> -u root -p <password> -s
-6 <
ipv6Address> <prefixlen> <gateway> -b <device>
-o <no|yes>
where < prefixlen > must be a number between 0 and 128.
• racadm deploy -m <module> -u root -p <password> -d
[-6]
• racadm deploy -a -u root -p <password>
Input
• -b < device > — Specifies the first boot device; must be used with -o.
33