Reference Guide

NOTE: The myrac.cfg file does not contain passwords.
To include passwords in the file, you must enter them
manually. If you want to remove password information
from the myrac.cfg file during configuration, use the -p
option.
connect
Description Connects to the switch or server serial console.
Synopsis
• racadm connect [-b] <server-n>
• racadm connect [-b] <switch-n>
Input -b — Connects to the switch or console using the binary mode. This is an optional argument;
a server or a switch must be present.
NOTE: If you use the -b option, reset the CMC to terminate the connect operation.
• server-n — server-n where n=1–16
• switch-n — switch-n where n= <a1 | a2 | b1 | b2 | c1 | c2>
coredump
Description Displays detailed information related to any recent critical
issues that have occurred with iDRAC. The coredump
information can be used to diagnose these critical issues.
If available, the coredump information is persistent across
iDRAC power cycles and remains available until either of
the following conditions occur:
• The coredump information is cleared with the
coredumpdelete subcommand.
• Another critical condition occurs on iDRAC. In this
case, the coredump information is relative to the
last critical error that occurred.
This option is applicable only for iDRAC.
To use this subcommand, you must have Execute Debug
Commands permission
See the coredumpdelete subcommand for more
information about clearing the coredump.
Synopsis
racadm coredump
Input None
Output None
Example
• racadm coredump
No Core Dump Data is currently available.
• racadm coredump
Feb 19 15:51:40 (none) last message repeated 5
times
32