Reference Guide

Default for CMC CMC
idRacType (Read Only)
Description Identifies the remote access controller type as iDRAC.
Legal Values Product ID
Default For iDRAC on Rack and Servers: 10
For iDRAC Enterprise on Blade Servers: 8
Example
racadm getconfig -g idRacInfo
# idRacType=8
# idRacProductInfo=Chassis Management Controller
# idRacDescriptionInfo=This system component provides a complete
set of remote management functions for blade servers
# idRacVersionInfo=P21
# idRacBuildInfo=200708301525
# idRacName=CMC-1
cfgLanNetworking
This group contains parameters to configure iDRAC or CMC NIC for IPv4.
One instance of the group is allowed. Some objects in this group may require iDRAC NIC to be reset, which may cause a
brief loss in connectivity. Objects that change iDRAC NIC IP address settings close all active user sessions and require
users to reconnect using the updated IP address settings.
For CMC, use this object with the config or getconfig subcommands.
To use this object property for CMC, you must have Chassis Configuration Administrator privilege.
NOTE: For CMC, you can configure any setting that is not preceded by the hash sign (#) in the output. To modify a
configurable object, use the -o option.
NOTE: For any network property changes on iDRAC to be successfully executed through RACADM, you must first
enable iDRAC NIC.
The following sections provide information about the objects in the cfgLanNetworking group.
cfgNicIPv4Enable (Read/Write)
Description Enables or disables iDRAC or CMC IPv4 stack.
Legal Values
• 1 (TRUE)
• 0 (FALSE)
Default 0
112