Release Notes
• Try launching the virtual console again.
• From CMC, access the iDRAC web interface and then launch the virtual console from the iDRAC web interface.
Systems aected: All systems supported by this release.
Tracking number: 105420
11 Description
If the system has both Emulex OCm14102 and Emulex LPm16002, and if you want to update the rmware from version 02.00.04 or
earlier to a newer version, update the rmware for Emulex LPm16002 rst. After the rmware update for Emulex LPm16002 is
complete, you can update the rmware for Emulex OCm141102.
Workaround N/A
Systems aected: All systems supported by this release.
Tracking number: 106560
12 Description
The description for P4510 and P4610 Intel PCIe SSD drives is displayed as ‘Express Flash NVMe P4500/P4600’ instead of ‘Express
Flash NVMe P4510/P4610’.
Workaround N/A
Systems aected: All systems supported by this release.
Tracking number: 114392
13 Description
iDRAC rmware update from the OS may fail with an error about virtual device being unreachable because of BitLocker or other
security software.
Workaround Retry the update.
Systems aected: PowerEdge R820
Tracking number: 114604
14 Description
While updating a rmware through Lifecycle Controller GUI using HTTPS share, the address eld displays no information.
Workaround Enter the address downloads.dell.com and proceed.
Systems aected: All systems supported by this release.
Tracking number: 128848
15 Description
Firmware update using downloads.dell.com fails, while using HTTP as Network share and Proxy type in Lifecycle Controller GUI.
Workaround
Use any one of the following methods to update the rmware:
• use the SOCKS4 and SOCKS5 proxy type in Lifecycle Controller GUI using HTTP as network share
• use the HTTPS network share in Lifecycle Controller GUI to download and update the rmware from downloads.dell.com
• use the iDRAC GUI
Systems aected: All systems supported by this release.
Tracking number: 130690
16 Description
While performing a repository update job, all rmware updates that are included in the repository are successful, however, the
repository update job displays as failed in the job queue.
Workaround No action is required as all the rmware updates are successful.
Known Issues — To be
xed in future releases 17