iDRAC8/7 with Lifecycle Controller Version 2.62.60.
Notes, cautions, and warnings NOTE: A NOTE indicates important information that helps you make better use of your product. CAUTION: A CAUTION indicates either potential damage to hardware or loss of data and tells you how to avoid the problem. WARNING: A WARNING indicates a potential for property damage, personal injury, or death. © 2019 Dell Inc. or its subsidiaries. All rights reserved. Dell, EMC, and other trademarks are trademarks of Dell Inc. or its subsidiaries.
Contents 1 Overview........................................................................................................................................................ 4 Version................................................................................................................................................................................. 4 Release date...........................................................................................................................................
1 Overview The Integrated Dell Remote Access Controller (iDRAC) is designed to make server administrators more productive and improve the overall availability of Dell servers. iDRAC alerts administrators to server issues, helps them perform remote server management, and reduces the need for physical access to the server. Additionally, iDRAC enables administrators to deploy, monitor, manage, configure, update, and troubleshoot Dell EMC servers from any location without using any agents.
2 Platforms affected 13th generation platforms: • PowerEdge T130 • PowerEdge T330 • PowerEdge T430 • PowerEdge R230 • PowerEdge R430 • PowerEdge R530 • PowerEdge R930 • PowerEdge XC430 • PowerEdge DL1300 • PowerEdge DSS7500 • PowerEdge DSS1610 Platforms affected 5
3 What is supported License requirements • Software licensing has replaced hardware licensing. • Many features in Lifecycle Controller are licensed. You must install the appropriate license to use these features. For more information, see the iDRAC 2.60.60.60 User's Guide and the Dell Lifecycle Controller GUI 2.60.60.60 User’s Guide available at www.dell.com/idracmanuals.
Supported web browsers • Microsoft Internet Explorer 11 • Microsoft EDGE • Safari version 8.0.8 • Safari version 9.0.
4 New in this release N/A 8 New in this release
5 Fixes Monitoring and alerting • 116571: Fixed an issue in systems with cabled PSU, where iDRAC stops responding for some time on pressing system identification button. • 114773, 114434 - Enabled sensors for Backplane 2 and Backplane 3 in PowerEdge R930 systems. • 102439 - Fixed the Backplane FRU self-test method in PowerEdge R930 systems.
6 Important notes 1 The drivers exposed by LC are present in a read-only drive labeled OEMDRV and the drive is active for 18 hours. During this period: • You cannot install any DUPs. • LC cannot invoke CSIOR. However, if an AC power cycle (cold boot) is performed, the OEMDRV drive is automatically deleted. 2 CPLD firmware update has no impact on Trusted Platform Module enablement. 3 Depending on the virtual storage device attached through iDRAC, that is, USB drive or CD/DVD .
7 Limitations • If Flex Address is enabled on Chassis Management Controllers (CMC), iDRAC and LC do not display the same MAC addresses. To view the chassis-assigned MAC address, use the iDRAC web interface or the CMC web interface. Go to General > Network Settings. • Lifecycle Controller may go into an infinite loop when a network operation is tried with an incorrect NFS share name. Restart Lifecycle Controller and retry the operation with the correct NFS share name details.
• VLAN Configuration is not supported on all vendor FC cards and the following Emulex cards.
– Press Tab until the table is selected. This issue is observed when you select the RAID level as 0, 5, 6, 10, 50, or 60. • When using Internet Explorer or Google Chrome to access the HTML5 virtual console from a Windows OS, the floating menu at the top of the window may not be displayed.
8 Known Issues — To be fixed in future releases 1 Description Some of the supported components are not displayed on the Firmware Update > View Current Versions page. Workaround Restart the system and open View Current Versions page. Systems affected: All systems supported by this release. Tracking number: N/A 2 Description If a Mellanox card is present in the system, then under Network Settings, the port number must be displayed as Port 1 and Port 2 because it is a dual port.
ValueName regex does not match the schema definition for some of the properties in the BIOS Attribute Registry and the Boot Sources Registry returned by Redfish API. Workaround Defer the regex check for the ValueName returned for BIOS Attribute Registry and the Boot Sources Registry against the schema. Systems affected: All systems supported by this release. Tracking number: 97643 6 Description Using remote RACADM, a hardware inventory export operation to a local share fails.
• Try launching the virtual console again. • From CMC, access the iDRAC web interface and then launch the virtual console from the iDRAC web interface. Systems affected: All systems supported by this release. Tracking number: 105420 11 Description If the system has both Emulex OCm14102 and Emulex LPm16002, and if you want to update the firmware from version 02.00.04 or earlier to a newer version, update the firmware for Emulex LPm16002 first.
9 Installation Installation instructions • From the Windows host operating system (managed node), run the Dell Update Package for Windows and follow the instructions on the update wizard. • From the Linux host operating system (managed node), run the Dell Update Package for Linux from the shell prompt. Follow the instructions displayed on the console.
10 Lifecycle Controller Remote Services — client tools Use the OpenWSMAN CLI client tool to send WS-MAN commands to Lifecycle Controller. OpenWSMAN CLI OpenWSMAN CLI is an open source Linux WS-MAN client. OpenWSMAN CLI source code and installation details are available at http:// sourceforge.net/projects/openwsman/files/wsmancli. Sample OpenWSMAN CLI Command (Enumeration Operation): wsman enumerate http://schemas.dmtf.
11 Accessing documents from Dell Support site Latest Release Notes To access the latest Release Notes for this version, follow these steps: 1 Go to www.dell.com/idracmanuals. 2 Click iDRAC8. 3 Click the link for this version of iDRAC. 4 Click Manuals & documents. Using direct links You can directly access the documents using the following links: Table 1. Direct links for documents URL Product dell.com/idracmanuals iDRAC and Lifecycle Controller dell.
12 Contacting Dell EMC Dell EMC provides several online and telephone-based support and service options. Availability varies by country and product, and some services may not be available in your area. To contact Dell EMC for sales, technical support, or customer service issues, see www.dell.com/ contactdell. If you do not have an active Internet connection, you can find contact information on your purchase invoice, packing slip, bill, or the product catalog.
