CLI Guide
Table 48. Example
SSNID Type User IP Address Login Date/Time
58999 SSH root 192.168.0.10 04/07/2016 12:00:34
Display the details of sessions without header
racadm getssninfo -A
"43584" "SSH" "root" "192.168.0.10" "04/07/2016 12:00:34"
getsvctag
Table 49. Details of attribute
Description
Displays the service tag of the host system.
Synopsis
racadm getsvctag [-m <module>]
Input -m <module> — Must be one of the following values:
• chassis
• server-<n> — where n = 1–16
• server-<nx> — where n = 1–8; x = a, b, c, d (lower case)
• switch-<n> — where n = 1–6
Output Any system tag as applicable.
Example
• Display Service tag of Server in Slot 1
racadm getsvctag -m server-1
• Display Service tag of all the components in the chassis
racadm getsvctag
getsysinfo
Table 50. Details of attribute
Description
Displays information related to iDRAC, managed system, and watchdog conguration.
NOTE: The host name and OS Name elds in the getsysinfo output display accurate information only if
the Dell OpenManage Server Administrator is installed on the managed system. Else, these elds may be
blank or inaccurate. An exception to this are VMware operating system names, which are displayed even
if the Server Administrator is not installed on the managed system.
Synopsis
racadm getsysinfo [-d] [-A] [-c] [-4] [-6]
Input
• —4 — Displays IPv4 settings
• —6 — Displays IPv6 settings
• —c — Displays common settings
• —d — Displays iDRAC information
• —A — Eliminates the printing of headers or labels
RACADM Subcommand Details 71