CLI Guide
Message ID = USR0032
Category = Audit
AgentID = RACLOG
Severity = Information
Timestamp = 2014-06-11 19:54:00
Message = The session for root from 192.168.0 using RACADM is logged off.
Message Arg 1 = root
Message Arg 2 = 10.94.98.92
Message Arg 3 = RACADM
FQDD = iDRAC.Embedded.1
---------------------------------------------------------------------------------
----
getractime
Table 30. Details of getractime attribute
Description Displays the current iDRAC time.
Synopsis
• racadm getractime [-d]
Input
• -d — Displays the time in the format, YYYYMMDDhhmmss.
Output The current iDRAC time is displayed.
Example
• racadm getractime
Mon May 13 17:17:12 2013
• racadm getractime -d
20141126114423
getsel
Table 31. Details of getsel attribute
Description
Displays all system event log (SEL) entries in iDRAC.
Synopsis
• racadm getsel [-i] [-m <module>]
• racadm getsel [-s <start>][-c <count>] [-m <module>] [--more]
NOTE: If no arguments are specied, the entire log is
displayed.
Input
• —i — Displays the number of entries in the SEL.
• -s — Displays the starting record number.
• -c — Species the number of records to display.
• -m <module> — Must be one of the following values:
– server-<n> : where n = 1–16
– server-<nx> : where n = 1–8; x = a, b, c, d (lower case)
• --more — Displays one screen at a time and prompts the user to continue (similar to the UNIX more
command.)
Example
• Display entire log.
racadm getsel
RACADM Subcommand Details 65