CLI Guide

NOTE: IPv6 Address 1 eld indicates static IP and IPv6 Address 2 eld indicates dynamic
IP.
NOTE: LOM Status is displayed only for iDRAC on Rack and Tower servers and is not displayed for
iDRAC Enterprise on Blade servers.
Example
• Display iDRAC network settings in server slot 1
racadm getniccfg -m server-1
getraclog
Table 29. Details of getraclog attribute
Description
The getraclog command displays RAC log entries.
Synopsis
• racadm getraclog [-i]
• racadm getraclog [-s <start>] [-c <count>] [--more]
racadm getraclog [-c <count>] [-s <start-record>] [--more]
NOTE: If options are not provided, the entire log is displayed.
Input
• -c — Species the number of records to display.
NOTE: On Local RACADM, the number of logs are restricted to 100 by default.
• --more — Displays one screen at a time and prompts you to continue (similar to the UNIX more command).
• -s — Species the starting record used for the display.
NOTE: When Enhanced Chassis Logging and Events feature is enabled, then -i and --more options are
not displayed.
Output
SeqNumber = 286
Message ID = USR0005
Category = Audit
AgentID = RACLOG
Severity = Information
Timestamp = 2012-10-05 06:25:27
Message = Login failed from processdisco06a: 192.168.0
Message Arg 1 = processdisco06a
Message Arg 2 = 10.92.68.245
FQDD = iDRAC.Embedded.1
Example
Display the recent 2 records for RAC log
racadm getraclog -c
2
SeqNumber = 4102
Message ID = LIC201
Category = Audit
AgentID = DE
Severity = Warning
Timestamp = 2014-06-12 01:38:19
Message = License yPMRJGuEf7z5HG8LO7gh assigned to device iDRAC expires in 4
days.
Message Arg 1 = yPMRJGuEf7z5HG8LO7ghMessage Arg 2 = iDRACMessage Arg 3 = 4
---------------------------------------------------------------------------------
--
SeqNumber = 4101
64 RACADM Subcommand Details