CLI Guide

Output

NOTE:

Table 28. Output

IPv4 settings:

NIC Enabled =1

IPv4 Enabled =1

DHCP Enabled =1

IP Address =10.94.225.165

Subnet Mask =255.255.255.128

Gateway =10.94.225.129

IPv6 settings:

IPv6 Enabled =1

DHCP6 Enabled =0

IP Address 1 =2000:de11:bcd1:fc14:1234:5678:2468:abcd

Gateway =::

Link Local Address =fe80::f21f:afff:fed0:82d6/64

IP Address 2 =::

IP Address 3 =::

IP Address 4 =::

IP Address 5 =::

IP Address 6 =::

IP Address 7 =::

IP Address 8 =::

IP Address 9 =::

IP Address 10 =::

IP Address 11 =::

IP Address 12 =::

IP Address 13 =::

IP Address 14 =::

IP Address 15 =::

LOM Status:

NIC Selection =dedicated

Link Detected =Yes

Speed =1Gb/s

Duplex Mode =Full Duplex

Active NIC =Dedicated

Static IPv4 settings:

Static IP Address =192.168.0.120

Static Subnet Mask =255.255.255.0

Static Gateway =192.168.0.1

Static IPv6 settings:

Static IP Address 1 =2000:de11:bcd1:fc14:1234:5678:2468:abcd/64

Static Prefix Length =64

Static Gateway =::

IPv6 information is displayed only if IPv6 is enabled in iDRAC.

RACADM Subcommand Details