CLI Guide

• Example 2: To traverse back from system object to the prompt:
– Input: racadm/system> cd..
– Output:
racadm>>
clearasrscreen
Table 9. Details of clearasrscreen
Description
Clears the last crash (ASR) screen that is in memory.
For more information, see "Enabling Last Crash Screen" section in the iDRAC User’s Guide.
NOTE: To run this subcommand, you must have the Clear Logs permission.
Synopsis
racadm clearasrscreen
Input
None
Output
Clears the last crash screen buer.
Example
racadm clearasrscreen
clearpending
Table 10. Details of clearpending
Description Deletes the pending values of all the attributes (objects) in the device (NIC, BIOS, FC, and Storage).
NOTE: If any attribute is not modied or a job is already scheduled for the same device, then the
pending state is not cleared or deleted.
Synopsis
racadm clearpending <FQDD>
Input <FQDD> — The values are:
• BIOS FQDD
• NIC FQDD
• FC FQDD
• Storage controller FQDD
Output A message is displayed indicating that the pending state is cleared or deleted.
Example
racadm clearpending NIC.Integrated.1-1
closessn
Table 11. Details of closessn attribute
Description Closes a communication session on the device. Use getssninfo to view a list of sessions that can be closed using this
command.
48 RACADM Subcommand Details