CLI Guide

iDRAC.NIC.Speed (Read or Write)
Table 638. Details of iDRAC.NIC.Speed attribute
Description
Species the speed for iDRAC NIC.
NOTE: To set this property:
• iDRAC.NIC.Selection must be set to Dedicated mode.
• iDRAC.NIC.Autoneg must be disabled.
• iDRAC.IPv4.Enable, iDRAC.IPv4.DHCPEnable, iDRAC.IPv6.Enable, and
iDRAC.IPv6.AutoConfig must be enabled.
Legal Values
• 0 — 10
• 1 — 100
• 2 — 1000
NOTE: You cannot manually set the Network Speed to 1000 MB. This option is available only if
iDRAC.NIC.Autoneg is set to 1 (Enabled).
Default Value 1 — 100
Write Privilege
Congure iDRAC
License Required
iDRAC Express or iDRAC Enterprise
Dependency
Cannot change NIC Speed unless AutoNeg is set to disabled.
iDRAC.NIC.TopologyLldp (Read or Write)
Table 639. Details of iDRAC.NIC.TopologyLldp attribute
Description Enables or disables the LLDP Protocol
Legal Values
• Enable-1
• Disable-0
Default Value 0—Disable
Write Privilege
Congure iDRAC
License Required
iDRAC Express or iDRAC Enterprise
Dependency None
Database Objects With Get and Set Commands 327