CLI Guide

cfgVFlashSD
This group is used to congure the properties for the Virtual Flash SD card.
NOTE: If the vFlash card is present but is not enabled, the query for any property under this group displays:
ERROR: vFlash is not enabled.
To view the properties of this group, enable the vFlash using the command:
racadm config -g cfgvFlashSD -o cfgvFlashSDEnable 1
The following sections provide information about the objects in the cfgVFlashSD group.
cfgVFlashSDInitialized (Read Only)
Table 358. Details of cfgVFlashSDInitialized
Description
Displays whether an SD card is initialized.
Legal Values
• 0
• 1
Default
None
cfgVFlashSDEnable (Read or Write)
Table 359. Details of cfgVFlashSDEnable
Description
Enables or disables the vFlash SD card.
NOTE: Disabling vFlashPartition by setting cfgVFlashSDEnable to 0 does not require a license.
Legal Values
• 0 (Disable)
• 1 (Enable)
Default
1
cfgVFlashSDSize (Read Only)
Table 360. Details of cfgVFlashSDSize
Description
Displays the size of the vFlash SD card in megabytes (MB).
Legal Values
A string of up to 64 characters.
Default
<card size>
220 iDRAC Property Database Group and Object Descriptions