CLI Guide

cfgNetTuningNicFullDuplex (Read or Write)
Table 352. Details of cfgNetTuningNicFullDuplex attribute
Description
Species the duplex setting for the NIC. This property is used only if thecfgNetTuningNicAutoNeg is set to 0
(disabled).
Legal Values
• 0 (Half Duplex)
• 1 (Full Duplex)
Default
1
cfgNetTuningNicMtu (Read or Write)
Table 353. Details of cfgNetTuningNicMtu attribute
Description
Indicated the maximum size of units in bytes transmitted by NIC.
Legal Values
576–1500
Default
1500
cfgSensorRedundancy
This group is used to set the power supply redundancy.
The following sections provide information about the objects in the cfgSensorRedundancy group.
This group is applicable only for iDRAC on Rack and Tower Servers and not for iDRAC Enterprise on Blade Servers.
cfgSensorRedundancyIndex (Read Only)
Table 354. Details of cfgSensorRedundancyIndex
Description
Species index for the sensor redundancy group being read. Only power supply redundancy is supported.
Legal Values
1
Default
None
218 iDRAC Property Database Group and Object Descriptions