CLI Guide

cfgNetTuningNicAutoneg (Read or Write)
Table 350. Details of cfgNetTuningNicAutoneg attribute
Description
Enables auto negotiation of physical link speed and duplex. If enabled, auto negotiation takes priority over other
values set in this group.
Legal Values
0 = Auto Negotiation is Disabled
1 = Auto Negotiation is Enabled
Default
1
Example
racadm getconfig -g cfgNetTuning
cfgNetTuningNicSpeed=100
cfgNetTuningNicFullDuplex=1
cfgNetTuningNicMtu=1500
cfgNetTuningNicAutoneg=1
cfgNetTuningNic100MB (Read or Write)
Table 351. Details of cfgNetTuningNic100MB
Description
Species the speed for iDRAC NIC.
NOTE: To set this property:
iDRAC NIC selection must be set to Dedicated mode.
iDRAC NIC Auto negotiation must be disabled.
iDRAC IPv4 must be enabled.
iDRAC IPv4 DHCP must be enabled.
iDRAC IPv6 must be enabled.
iDRAC IPv6 auto conguration must be enabled.
Legal Values
0 (10 MBit)
1 (100 MBit)
2 (1000 MBit)
NOTE: You cannot manually set the Network Speed to 1000 MBit. This option is available only if
cfgNetTuningNicAutoNeg is set to 1 (Enabled).
Default
1
iDRAC Property Database Group and Object Descriptions 217