CLI Guide

The following sections provide information about the objects in the cfgSmartCard group.
cfgSmartCardLogonEnable (Read or Write)
Table 348. Details of cfgSmartCardLogonEnable
Description
To iDRAC using a smart card, enable or disable with Remote RACADM support for access.
NOTE: Enabling with remote RACADM is only applicable for iDRAC on Rack and Tower Servers.
Legal Values
• 0 (Disabled)
• 1 (Enabled)
• 2 (Enabled with Remote RACADM) — It is not applicable for iDRAC Enterprise on Blade Servers.
Default
0
cfgSmartCardCRLEnable (Read or Write)
Table 349. Details of cfgSmartCardCRLEnable
Description
Enables or disables the Certicate Revocation List (CRL).
This object is applicable only for iDRAC on Rack and Tower Servers and not for iDRAC Enterprise on Blade Servers.
Legal Values
• 1 (TRUE)
• 0 (FALSE)
Default
0
cfgNetTuning
This group enables users to congure the advanced network interface parameters for the RAC NIC. When congured, the updated settings
may take up to a minute to become active.
NOTE
: This group is applicable only for iDRAC on Rack and Tower Servers and not for iDRAC Enterprise on Blade Servers.
CAUTION: Use extra precaution when modifying properties in this group. Inappropriate modication of the properties in this
group can result in your RAC NIC become inoperable.
The following sections provide information about the objects in the
cfgNetTuning group.
216
iDRAC Property Database Group and Object Descriptions