CLI Guide

cfgServerPowerPCIeAllocation (Read or Write)
Table 298. Details of cfgServerPowerPCIeAllocation
Description
Amount of power allocated to the PCIe cards.
This object is applicable for iDRAC Enterprise only for specic Blade Servers and not for iDRAC on Rack and Tower
Servers.
You must have the Administrator privileges to modify the value for this object.
Legal Values
0 W: For platforms that do not support PCIe cards.
100 W — 500 W: For platforms that support PCIe cards.
Default
0: For platforms that do not support PCIe cards.
500 W: For platforms that support PCIe cards.
cfgServerPowerSupply
This group contains information related to the power supplies.
The cfgServerPowerSupply object group is applicable only for iDRAC on Rack and Tower Servers and not for iDRAC Enterprise on Blade
Servers.
NOTE
: The getcong subcommand always shows eight cfgServerPowerSupply indexes, even if two power supplies are installed
in the system or the system supports a maximum of two PSUs. For the uninstalled and unsupported units, all the objects in the
cfgServerPowerSupply group displays a value of 0.
The following sections provide information about the objects in the cfgServerPowerSupply group.
cfgServerPowerSupplyIndex
Table 299. Details of cfgServerPowerSupplyIndex
Description
Species index of the PSU.
NOTE: Indexes 1–8 are supported to support up to 8 PSUs. If any PSU is not present then
cfgServerPowerSupplyOnlineStatus does not exist and for all the other properties, it is 0.
Legal Values
Integer 1–8
Default
None
iDRAC Property Database Group and Object Descriptions 201