CLI Guide
cfgRhostsSyslogServer1 Read or Write)
Table 133. Details of attribute - cfgRhostsSyslogServer1
Description
To store the RAC and SEL logs specify the rst of three possible remote syslog servers. This property is only valid if
cfgRhostsSyslogEnable is set to 1 (enabled).
Legal Values
String from 0 to 63 characters.
Default
<blank>
cfgRhostsSyslogServer2 Read or Write)
Table 134. Details of attribute - cfgRhostsSyslogServer2
Description
To store the RAC and SEL logs Specify the second of three possible remote syslog servers. This property is only valid
if cfgRhostsSyslogEnable is set to 1 (enabled).
Legal Values
String from 0 to 63 characters.
Default
<blank>
cfgRhostsSyslogServer3 Read or Write)
Table 135. Details of attribute - cfgRhostsSyslogServer3
Description
To store the RAC and SEL logs specify the third of three possible remote syslog servers. This property is only valid if
cfgRhostsSyslogEnable is set to 1(enabled).
Legal Values
String from 0 to 63 characters.
Default
<blank>
cfgUserAdmin
This group provides conguration information about the users allowed to access iDRAC through the available remote interfaces.
Up to 16 instances of the user group are allowed. Each instance represents the conguration for an individual user.
Use this object with the cong or getcong subcommands. To use the command as follows: -i <index group>, supply an index group
number
The following sections provide information about the objects in the cfgUserAdmin group.
148
iDRAC Property Database Group and Object Descriptions