CLI Guide

iDRAC Property Database Group and Object
Descriptions
The iDRAC property database contains the conguration information for iDRAC. Associated object is organizing data, and object group is
organizing object. The IDs for the groups and objects that the property database supports are listed in this section for iDRAC Enterprise on
Blade Servers and iDRAC Enterprise or Express on Rack and Tower Servers.
To congure iDRAC, use the group and object IDs with the RACADM subcommands.
NOTE: You can congure a setting that does not have a hash symbol (#) as the prex in its output name. To modify a
congurable object, use the -o option.
NOTE: Racadm sets the value of objects without performing any functional validation on them. For example, RACADM allows
you to set the Certicate Validation object to 1 with the Active Directory object set to 0, even though Certicate Validation can
happen only if Active Directory is enabled. Similarly, the cfgADSSOEnable object can be set to 0 or 1 even if the cfgADEnable
object is 0, but it takes eect only if Active Directory is enabled.
All string values are limited to displayable ASCII characters, except where otherwise noted.
Topics:
• Displayable Characters
• idRacInfo
• cfgStaticLanNetworking
• cfgRemoteHosts
• cfgUserAdmin
• cfgEmailAlert
• cfgSessionManagement
• cfgSerial
• cfgOobSnmp
• cfgRacTuning
• ifcRacManagedNodeOs
• cfgRacVirtual
• cfgServerInfo
• cfgActiveDirectory
• cfgLDAP
• cfgLdapRoleGroup
• cfgStandardSchema
• cfgThermal
• cfgIpmiSol
• cfgIpmiLan
• cfgIpmiPetIpv6
• cfgIpmiPef
• cfgIpmiPet
3
138 iDRAC Property Database Group and Object Descriptions