CLI Guide

usercertview
Table 105. Details of usercertview
Description Displays the user certicate or user CA certicate that exists on iDRAC.
Synopsis
racadm usercertview -t <type> [-A] -i <index>
Input
• -t — Species the type of certicate to view, either the user certicate or the user CA certicate.
– 1=user certicate
– 2=user CA certicate
• -A — Prevents printing headers or labels.
•
-i — Index number of the user. Valid values are 2–16.
Example
To view user certicate for user 6.
racadm usercertview -t 1 -i 6
Serial Number : 01
Subject Information:
Country Code (CC) : US
State (S) : Texas
Locality (L) : Round Rock
Organization (O) : Dell Inc.
Common Name (CN) : iDRAC default certificate
Issuer Information:
Country Code (CC) : US
State (S) : Texas
Locality (L) : Round Rock
Organization (O) : Dell Inc.
Organizational Unit (OU): Remote Access Group
Common Name (CN) : iDRAC default certificate
Valid From : Jun 7 23:54:19 2011 GMT
Valid To : Jun 4 23:54:19 2021 GMT
vashsd
Table 106. Details of
vashsd
Description Allows you to initialize or get the status of the vFlash SD card. The initialize operation removes all the existing
partitions and resets the card.
The status operation displays the status of the last operation performed on the card.
To run this subcommand, you must have the Access Virtual Media privilege.
NOTE: After you restart the iDRAC, the status of the previous initialize operation is erased.
Synopsis
• racadm vflashsd initialize
• racadm vflashsd status
Input
• Initialize— performs initialize operation on SD card.
• Status — indicates to view the progress or status report of the initialize operation.
RACADM Subcommand Details 135