CLI Guide

• To export the collected report data to local share.
racadm techsupreport export -f <filename>
Input
• -t — type of logs. You can specify any of the following values separated by a ‘,’ (comma)
– SysInfo — System Information
– OSAppNoPII — Filtered OS and Application data
– OSAppAll — OS and Application data
– TTYLog — TTYLog data
NOTE:
– For updating the operating system application data collection, enter the value OSAppNoPII or
OSAppAll to the -t option.
– If no value is specied then system information data is collected.
– To perform the Oslog collection, make sure that ISM is installed and running.
– TTYLog includes PCIeSSD data.
• -l — network share location to export the report
• -u — user name for the remote share to export the report
• -p — password for the remote share to export the report
• -f— target lename for the exported log.
NOTE: The le name must have .zip as the
extension.
Examples
• To collect the system information data.
racadm techsupreport collect —t <type of logs>
• To collect the system information and TTYLog data.
racadm techsupreport collect -t SysInfo,TTYLog
• To collect the operating system application data.
racadm techsupreport collect -t OSAppAll
• To export the collected Tech Support Report, to a CIFS share.
racadm techsupreport export -l //192.168.0/share -u myuser -p xxx
• To export the collected Tech Support Report, to an NFS share.
racadm techsupreport export -l 192.168.0:/share
• To export the collected Tech Support Report to the local le system.
racadm techsupreport export -f tsr_report.zip
testemail
Table 98. Details of testemail attribute
Description
Sends a test email from iDRAC to a specied destination. Prior to running the test email command, make sure
that the SMTP server is congured.
The specied index in the idrac.EmailAlert group must be enabled and congured properly. For more
information, see the see the Integrated Dell Remote Access Controller (iDRAC8) and iDRAC7 RACADM
Command Line Interface Reference Guide available at www.dell.com/support/manuals.
Synopsis
racadm testemail -i <index>
Input -i <index> — Species the index of the email alert to test.
RACADM Subcommand Details 129