CLI Guide

systemcong
Table 94. Details of systemcong
Description Enables you to perform the following:
• Backup and restore for iDRAC and entire system conguration.
• Automatic scheduling of backup operation.
• View the auto backup feature settings.
• Clear the auto backup feature settings.
NOTE:
• To run this subcommand, you require the Server Prole Export and Import license.
• Backup operation is licensed (Enterprise) but restore operation is not licensed.
• If Lifecycle Controller is disabled, starting a restore operation is unsuccessful.
• If CSIOR is disabled, the system inventory can have old data during the backup operation. An appropriate
warning message is displayed.
• The autobackupscheduler can be enabled or disabled. For more information about enable or disable,
see LifecycleController.LCAttributes.autobackup
• The minimum Lifecycle Controller version 1.3 is required.
Synopsis
• racadm systemconfig backup -f <filename> <target> [-n passphrase] [-l
<location> -u <user name> -p <password>] [--vFlash]
• racadm systemconfig restore -f <filename> <target> [-n passphrase ] [--
nopreserve] [-l <location> -u <user name> -p <password>] [--vFlash]
• To create an AutoBackup Schedule.
racadm systemconfig backup [-f <filename>] <target> [-n <passphrase>][-l
<location> -u <user name> -p <password>] [--vFlash] -time <time> [-dom
<DayOfMonth>] [-wom <WeekOfMonth>] [-dow <DayofWeek>] -rp <repeat> -mb
<MaxBackup>
• To view an AutoBackup Schedule.
racadm systemconfig getbackupscheduler
• To delete an AutoBackup Schedule.
racadm systemconfig clearbackupscheduler
NOTE: After the parameters are cleared, the AutoBackupScheduler is disabled. To schedule the
backup again, enable the AutoBackupScheduler.
Input
• -n — Species a pass phrase used to encrypt or decrypt the conguration data. The pass phrase must have 8
to 32 characters, and one upper and lower case character.
NOTE: This pass phrase is optional.
• -l — Species the network share location, can be either CIFS or NFS.
• -f — Species the image location and the le name.
NOTE: If the le is in a subfolder within the share location, then specify the network share location in
the –l option and specify the subfolder location and the lename in the –f option.
• -u — Species the user name for the remote share access.
• -p — Species the password for the remote share access.
• --vFlash — Selects vFlash SD as target location for back up.
• --nopreserve — Deletes all the virtual disks and congurations.
• -time: Species the time to schedule an autobackup in HH:MM format. This parameter must be specied.
• -dom: Species the day of month to schedule an autobackup. Valid values are 1–28, L(Last day) or '*' (default
— any day).
RACADM Subcommand Details 125