CLI Guide

• To cancel background initialization of a virtual disk
racadm raid cancelbgi:Disk.Virtual.0:RAID.Integrated.1-1
• To replace physical disk in a virtual disk conguration
racadm raid replacephysicaldisk:Disk.Bay.0:Enclosure.Internal.0-0:RAID.Integrated.1-1 -
dstpd Disk.Bay.1:Enclosure.Internal.0-0:RAID.Integrated.1-1
• To set virtual disk as a boot drive
racadm raid setbootvd:RAID.Integrated.1-1 -vd Disk.Virtual.0:RAID.Integrated.1-1
• To set virtual disk as a boot drive
racadm raid setbootvd:RAID.Integrated.1-1 -vd Disk.Virtual.0:RAID.Integrated.1-1
• To force physical disk online or retrive data on physical/virtual disk
racadm raid forceonline:Disk.Bay.0:Enclosure.Internal.0-0:RAID.Integrated.1-1
• To force physical disk oine or remove disk from virtual disk conguration
racadm raid forceoffline:Disk.Bay.0:Enclosure.Internal.0-0:RAID.Integrated.1-1
• To unlock storage
racadm storage unlock:RAID.Integrated.1-1 -key 1234 -passwd Dell@333
swinventory
Table 93. Details of swinventory
Description Displays the list of software objects and associated properties installed on a server.
NOTE: Lifecycle Controller and CSIOR may not be enabled to run this subcommand.
Synopsis
racadm swinventory
Input
racadm swinventory
Output
racadm swinventory
------------------SOFTWARE INVENTORY-------------------
ComponentType = FIRMWARE
ElementName = Power Supply.Slot.2
FQDD = PSU.Slot.2
InstallationDate = 2013-06-11T13:02:46Z
Current Version = 07.2B.7D
---------------------------------------------------------------
ComponentType = FIRMWARE
ElementName = Integrated Remote Access Controller
FQDD = iDRAC.Embedded.1-1
InstallationDate = NA
Rollback Version = 1.50.50
----------------------------------------------------------------
ComponentType = FIRMWARE
ElementName = Integrated Remote Access Controller
FQDD = iDRAC.Embedded.1-1
InstallationDate = 2013-06-11T13:02:48Z
Current Version = 1.50.50
NOTE: Conguration changes and rmware updates that are made within the operating system may not reect properly in the
inventory until you perform a server restart.
124 RACADM Subcommand Details