CLI Guide

To get the list of physical disks, run the following command:
racadm storage get pdisks
To get the properties of PCIeSSD physical disk, run the
following command:
racadm storage get pdisks:<PCIeSSD FQDD>
To generate and view information about the inventory of fans,
run the following command:
racadm storage get fans --refkey <enclosure
FQDDs separated by comma>
racadm storage get fans --refkey <enclosure
FQDDs separated by comma > -o
racadm storage get fans --refkey <enclosure
FQDDs separated by comma> -o -p <property
names separated by comma>
To generate and view information about the inventory of EMMs,
run the following command:
racadm storage get emms -refkey <enclosure
FQDDs separated by comma>
racadm storage get emms --refkey <enclosure
FQDDs separated by comma> -o
racadm storage get emms --refkey <enclosure
FQDDs separated by comma> -o -p <property
names separated by comma>
To generate and view information about the inventory of PSU,
run the following command:
racadm storage get psus -refkey <enclosure
FQDDs separated by comma>
racadm storage get psus --refkey <enclosure
FQDDs separated by comma> -o
racadm storage get psus --refkey <enclosure
FQDDs separated by comma> -o -p <property
names separated by comma>
Conguration
To view the help details for a conguration command, run the
following command:
racadm storage help <command>
where command can take below values
converttoraid, converttononraid,
controllers, clearconfig,
createsecuritykey, createvd,
deletesecuritykey, deletevd, encryptvd,
enclosures, emms, fans, hotspare,
importconfig, ccheck, secureerase,
preparetoremove, blink, unblink,
cancelcheck, init, modifysecuritykey, psus,
pdisks, resetconfig, tempprobes, vdisks,
cancelbgi,
replacephysicaldisk, setbootvd,
forceonline, forceoffline, unlock and
patrolread.
To create, delete, and secure the virtual disks. To start or stop
the consistency check on the specied virtual disk, run the
following command:
racadm storage createvd:<Controller FQDD> -
rl {r0|r1|r5|r6|r10|r50|r60}[-wp {wt|wb|
RACADM Subcommand Details
109