CLI Guide

• To get the properties of PCIeSSD controller, run the following
command:
racadm storage get controllers:<PcieSSD
controller FQDD>
• To generate and view information about the inventory of
batteries, run the following command:
racadm storage get batteries -o
racadm storage get batteries --refkey
<controller FQDD's separated by comma>
racadm storage get batteries --refkey
<controller FQDD's separated by comma> -o
racadm storage get batteries --refkey
<controller FQDD's separated by comma> -o -
p <property names separated by comma>
• To generate and view information about the inventory of virtual
disks, run the following command:
racadm storage get vdisks
racadm storage get vdisks --refkey
<controller FQDDs separated by comma>
racadm storage get vdisks --refkey
<controller FQDDs separated by comma> -o
racadm storage get vdisks --refkey
<controller FQDDs separated by comma> -o -p
<property names separated by comma>
• To generate and view information about the inventory of
enclosures, run the following command:
racadm storage get enclosures -o
racadm storage get enclosures --refkey
<connector FQDDs separated by comma>
racadm storage get enclosures --refkey
<connector FQDDs separated by comma> -o -p
<property names separated by comma>
• To get the list of enclosures, run the following command:
racadm storage get enclosures
• To get the properties of the PCIeSSD enclosure, run the
following command:
racadm storage get enclosures:<PCIeSSD
enclosure FQDD>
• To generate and view information about the inventory of
physical disk drives, run the following command:
racadm storage get pdisks
racadm storage get pdisks -o
racadm storage get pdisks -o -p <property
names separated by comma>
racadm storage get pdisks --refkey
<enclosure/Backplanes FQDDs separated by
comma>
racadm storage get pdisks --refkey
<enclosure/Backplanes FQDDs separated by
comma> -o
racadm storage get pdisks --refkey
<enclosure/Backplanes FQDDs separated by
comma> -o -p <property names separated by
comma>
108
RACADM Subcommand Details