CLI Guide

Input
• -t — Species the key to upload. The value is:
– 1 — SSL key used to generate the server certicate.
• -f — Species the lename of the SSL key that must be uploaded.
Output If upload is successful, the message SSL key successfully uploaded to the RAC is displayed. if upload
is unsuccessful, error message is displayed.
Example
racadm sslkeyupload -t 1 -f c:\sslkey.txt
sslresetcfg
Table 89. Details of sslresetcfg attribute
Description Restores the web-server certicate to factory default and restarts web-server. The certicate takes eect 30
seconds after the command is entered.
To run this subcommand, you must have the Congure iDRAC privilege.
Synopsis
racadm sslresetcfg
Input N/A
Example
racadm sslresetcfg
Certificate generated successfully and webserver restarted.
storage
Table 90. Details of storage
Description Allows you to run the commands to control storage arrays.
To run this subcommand for conguring the storage properties, you
must have the server control permission.
NOTE: You can also run the command using raid in place
of the storage command.
Synopsis
Inventory
• To view the help details for get command, run the following
command:
racadm storage help get
• To generate and view information about the inventory of
storage root node, run the following command:
racadm storage get status
• To generate and view information about the inventory of
controllers, run the following command:
racadm storage get controllers -o
racadm storage get controllers -o -p
<property names separated by comma>
• To get the list of controllers, run the following command:
racadm storage get controllers
RACADM Subcommand Details 107