API Guide

Parameter Type Description
WWNN String The eective current World-Wide Node
Name (WWNN) of this network device
function (physical function). If an assignable
WWNN is not supported, WWNN is a read
only alias of the PermanentWWNN.
WWNSource NetworkDeviceFunction.v1_0_0.WWNSourc
e
The conguration source of the World-Wide
Names (WWNs) for this connection
(WWPN and WWNN).
FCoELocalVLANId Int64 For FCoE connections, The VLAN ID
congured locally by setting this property.
This value shall be used for FCoE trac to
this network device function during boot
unless AllowFIPVLANDiscovery is true and a
valid FCoE VLAN ID is found via the FIP
VLAN Discovery Protocol.
FCoEActiveVLANId Int64 The active FCoE VLAN ID.
BootTargets
WWPN String World-Wide Port Name (WWPN) to boot
from.
LUNID String The Logical Unit Number (LUN) ID to boot
from on the device referred to by the
corresponding WWPN.
Ethernet
MACAddress String The eective current MAC Address of this
network device function. If an assignable
MAC address is not supported, this is a
read-only alias of the
PermanentMACAddress.
PermanentMACAddress String This is the permanent MAC address
assigned to this network device function
(physical function).
MTUSize Int64 The Maximum Transmission Unit (MTU)
congured for this Network Device
Function. This value serves as a default for
the OS driver when booting. The value only
takes eect on boot.
iSCSIBoot
IPAddressType NetworkDeviceFunction.v1_0_0.IPAddressTy
pe
The type of IP address (IPv6 or IPv4) being
populated in the iSCSIBoot IP address elds.
Mixing of IPv6 and IPv4 addresses on the
same network device function shall not be
permissible.
InitiatorIPAddress String The IPv6 or IPv4 address of the iSCSI boot
initiator.
InitiatorName String The iSCSI boot initiator name.
58 Redsh resources